4.5” Racing Clutch & Flywheel

  • 4.5” Racing Clutch & Flywheel

4.5” Racing Clutch & Flywheel

1

  • Don’t see your configuration?  

    Call us at 714-630-2764 or email: info@mcleodracing.com

    PTT's 4.5" Power-V racing clutches are the lightest Moment of Inertia (M.O.I.) clutches in our product line. They have approximately half the M.O.I. of our 5.5" clutches. If the rules you race under allow a clutch this small, you cannot afford to pass up this speed advantage.

    The simple facts are this:

    A PTT 4.5" clutch makes your racecar accelerate faster. It lowers the rotating weight in your racecar's driveline, allowing your engine's horsepower to accelerate the car faster.

    A PTT 4.5" clutch also allows the car to decelerate faster without using up more of your brakes. There is less inertia in the drivetrain that the brakes have to slow down so you get more 'engine braking' with a lighter clutch.

    Quicker Shifting. The lower M.O.I. of the clutch discs allow quicker shifting and less wear on the synchros, or dog rings, in your transmission. Lower M.O.I. clutch discs change R.P.M. faster because they have very low stored inertia, causing less stress on transmission parts.

    PTT’s 4.5” clutch has 56% of the M.O.I. of a 5.5” clutch.  4.5” clutches are available in 1, 2, 3 or 4 disc configurations.

    When it is time to select a winning clutch for your racecar, remember:

    Lighter really is FASTER!

    When will my order ship?

    Click here for 4.5" Racing Clutch Catalog.

  • KC2128

    This kit includes:

    CC216A1Z80

    • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
    • 1-1/8” x 10 tooth spline (coarse spline)
    • Clutch torque capacity: 600 lb.ft. peak torque capacity
    • Designed for cars with 300 – 500 lb.ft. of engine torque
    • Weight = 4.17 pounds

    FC101

    • Lightweight 4.5” button flywheel
    • Fits Chevy early model crank (1985 & earlier with 2 piece rear main seal)
    • Weight = 1.77 pounds

     

      KC2828

      This kit includes:

      CC216A1Z80

      • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
      • 1-1/8” x 10 tooth spline (coarse spline)
      • Clutch torque capacity: 600 lb.ft. peak torque capacity
      • Designed for cars with 300 – 500 lb.ft. of engine torque
      • Weight = 4.17 pounds

      FC103

      • Lightweight 4.5” button flywheel
      • Fits Chevy late model crank (1986-1997 with 1 piece rear main seal)
      • Weight = 1.89 pounds

       

        KC2028

        This kit includes:

        CC216A1Z80

        • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
        • 1-1/8” x 10 tooth spline (coarse spline)
        • Clutch torque capacity: 600 lb.ft. peak torque capacity
        • Designed for cars with 300 – 500 lb.ft. of engine torque
        • Weight = 4.17 pounds

        FC105

        • Lightweight 4.5” button flywheel
        • Fits Chevy LS V-8
        • Weight = 2.01 pounds

         

          KC2328

          This kit includes:

          CC216A1Z80

          • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
          • 1-1/8” x 10 tooth spline (coarse spline)
          • Clutch torque capacity: 600 lb.ft. peak torque capacity
          • Designed for cars with 300 – 500 lb.ft. of engine torque
          • Weight = 4.17 pounds

          FC301

          • Lightweight 4.5” button flywheel
          • Fit Ford SB V-8
          • Weight = 2.33 pounds

           

            KC2129

            This kit includes:

            CC216A1Z90

            • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
            • 1-5/32” x 26 tooth spline (fine spline)
            • Clutch torque capacity: 600 lb.ft. peak torque capacity
            • Designed for cars with 300 – 500 lb.ft. of engine torque
            • Weight = 4.17 pounds

            FC101

            • Lightweight 4.5” button flywheel
            • Fits Chevy early model crank (1985 & earlier with 2 piece rear main seal)
            • Weight = 1.77 pounds

             

              KC2829

              This kit includes:

              CC216A1Z90

              • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
              • 1-5/32” x 26 tooth spline (fine spline)
              • Clutch torque capacity: 600 lb.ft. peak torque capacity
              • Designed for cars with 300 – 500 lb.ft. of engine torque
              • Weight = 4.17 pounds

              FC103

              • Lightweight 4.5” button flywheel
              • Fits Chevy late model crank (1986-1997 with 1 piece rear main seal)
              • Weight = 1.89 pounds

               

                KC2029

                This kit includes:

                CC216A1Z90

                • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
                • 1-5/32” x 26 tooth spline (fine spline)
                • Clutch torque capacity: 600 lb.ft. peak torque capacity
                • Designed for cars with 300 – 500 lb.ft. of engine torque
                • Weight = 4.17 pounds

                FC105

                • Lightweight 4.5” button flywheel
                • Fits Chevy LS V-8
                • Weight = 2.01 pounds

                 

                  KC2329

                  This kit includes:

                  CC216A1Z90

                  • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
                  • 1-5/32” x 26 tooth spline (fine spline)
                  • Clutch torque capacity: 600 lb.ft. peak torque capacity
                  • Designed for cars with 300 – 500 lb.ft. of engine torque
                  • Weight = 4.17 pounds

                  FC301

                  • Lightweight 4.5” button flywheel
                  • Fits Ford SB V-8
                  • Weight = 2.33 pounds

                   

                    KC2726

                    This kit includes:

                    CC216A1C63

                    • 4.5” 2 disc clutch with .105” thick sintered bronze metallic discs
                    • 1” x 23 tooth spline
                    • Clutch torque capacity: 500 lb.ft. peak torque capacity
                    • Designed for cars with 250 – 400 lb.ft. of engine torque
                    • Weight = 4.17 pounds

                    FC501

                    • Lightweight 4.5” button flywheel
                    • Fits Mazda 4 cylinder, Formula SCCA
                    • Weight = 2.56 pounds

                     

                       

                      KC3128

                      This kit includes:

                      CC316A1Z80

                      • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                      • 1-1/8” x 10 tooth spline (coarse spline)
                      • Clutch torque capacity: 900 lb.ft. peak torque capacity
                      • Designed for cars with 450 – 700 lb.ft. of engine torque
                      • Weight = 5.35 pounds

                      FC101

                      • Lightweight 4.5” button flywheel
                      • Fits Chevy early model crank (1985 & earlier with 2 piece rear main seal)
                      • Weight = 1.77 pounds

                       

                        KC3828

                        This kit includes:

                        CC316A1Z80

                        • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                        • 1-1/8” x 10 tooth spline (coarse spline)
                        • Clutch torque capacity: 900 lb.ft. peak torque capacity
                        • Designed for cars with 450 – 700 lb.ft. of engine torque
                        • Weight = 5.35 pounds

                        FC103

                        • Lightweight 4.5” button flywheel
                        • Fits Chevy late model crank (1986-1997 with 1 piece rear main seal)
                        • Weight = 1.89 pounds

                         

                          KC3028

                          This kit includes:

                          CC316A1Z80

                          • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                          • 1-1/8” x 10 tooth spline (coarse spline)
                          • Clutch torque capacity: 900 lb.ft. peak torque capacity
                          • Designed for cars with 450 – 700 lb.ft. of engine torque
                          • Weight = 5.35 pounds

                          FC105

                          • Lightweight 4.5” button flywheel
                          • Fits Chevy LS V-8
                          • Weight = 2.01 pounds

                           

                            KC3328

                            This kit includes:

                            CC316A1Z80

                            • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                            • 1-1/8” x 10 tooth spline (coarse spline)
                            • Clutch torque capacity: 900 lb.ft. peak torque capacity
                            • Designed for cars with 450 – 700 lb.ft. of engine torque
                            • Weight = 5.35 pounds

                            FC301

                            • Lightweight 4.5” button flywheel
                            • Fits Ford SB V-8
                            • Weight = 2.33 pounds

                             

                              KC3129

                              This kit includes:

                              CC316A1Z90

                              • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                              • 1-5/32” x 26 tooth spline (fine spline)
                              • Clutch torque capacity: 900 lb.ft. peak torque capacity
                              • Designed for cars with 450 – 700 lb.ft. of engine torque
                              • Weight = 5.35 pounds

                              FC101

                              • Lightweight 4.5” button flywheel
                              • Fits Chevy early model crank (1985 & earlier with 2 piece rear main seal)
                              • Weight = 1.77 pounds

                               

                                KC3829

                                This kit includes:

                                CC316A1Z90

                                • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                                • 1-5/32” x 26 tooth spline (fine spline)
                                • Clutch torque capacity: 900 lb.ft. peak torque capacity
                                • Designed for cars with 450 – 700 lb.ft. of engine torque
                                • Weight = 5.35 pounds

                                FC103

                                • Lightweight 4.5” button flywheel
                                • Fits Chevy late model crank (1986-1997 with 1 piece rear main seal)
                                • Weight = 1.89 pounds

                                 

                                  KC3029

                                  This kit includes:

                                  CC316A1Z90

                                  • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                                  • 1-5/32” x 26 tooth spline (fine spline)
                                  • Clutch torque capacity: 900 lb.ft. peak torque capacity
                                  • Designed for cars with 450 – 700 lb.ft. of engine torque
                                  • Weight = 5.35 pounds

                                  FC105

                                  • Lightweight 4.5” button flywheel
                                  • Fits Chevy LS V-8
                                  • Weight = 2.01 pounds

                                   

                                    KC3329

                                    This kit includes:

                                    CC316A1Z90

                                    • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                                    • 1-5/32” x 26 tooth spline (fine spline)
                                    • Clutch torque capacity: 900 lb.ft. peak torque capacity
                                    • Designed for cars with 450 – 700 lb.ft. of engine torque
                                    • Weight = 5.35 pounds

                                    FC301

                                    • Lightweight 4.5” button flywheel
                                    • Fits Ford SB V-8
                                    • Weight = 2.33 pounds

                                     

                                      KC3726

                                      This kit includes:

                                      CC316A1C63

                                      • 4.5” 3 disc clutch with .105” thick sintered bronze metallic discs
                                      • 1” x 23 tooth spline
                                      • Clutch torque capacity: 600 lb.ft. peak torque capacity
                                      • Designed for cars with 300 – 480 lb.ft. of engine torque
                                      • Weight = 5.35 pounds

                                      FC501

                                      • Lightweight 4.5” button flywheel
                                      • Fits Mazda 4 cylinder, Formula SCCA
                                      • Weight = 2.56 pounds

                                       

                                    • 1. PRICES AND TERMS. The price of products sold shall be based upon PowerTrain Technology’s (PTT) prices in effect on the date of shipment. Price is F.O.B. PTT’s point of shipment. Payment terms shall be in accordance with terms set forth on PTT’s invoice.
                                      2. TAXES. Published prices do not include sales tax, use tax and other excise taxes. If a tax exemption is claimed by Buyer, satisfactory proof of such exemption will need to be supplied by Buyer to PTT.
                                      3. CANCELLATIONS AND CHANGES. Order changes and cancellations must be submitted in writing.
                                      4. RETURNED GOODS. Please call PTT for a return authorization (RA) number. Clearly mark this number on the outside of the returned package. PTT will not accept unauthorized returns. Returned parts must be in clean, unused, original condition, packed in the original box, and received by PTT within 30 days of date of sale, freight prepaid by Buyer. After 30 days, PTT reserves the right to refuse credit for returned goods. Custom and obsolete products are non-returnable.
                                      5. SHIPPING. Orders are shipped via UPS unless weight or size is prohibitive, in which case motor freight will be used. Shipping charges will be added to the invoice and become the responsibility of Buyer. Any claims for losses or damage in transit shall be against the carrier only.
                                      6. DELIVERED QUANTITIES. PTT will make every effort to ship quantities ordered. Any claims for shortages must be made within 10 days from the date of receipt of the goods by Buyer.
                                      7. INTERNATIONAL ORDERS. Delivery, duties, customs and taxes are the responsibility of Buyer.
                                      8. WARRANTY. All products are warranted to be free from defects in material and workmanship for the life of the product. Any product determined to be defective by PTT will be repaired or replaced free of charge at PTT’s discretion. Products sold for competition and off road racing use are not intended for street use. There are no additional warranties or representations, express or implied, due to the unusual stresses placed on racing parts. In no event will PTT be liable for consequential, incidental or other damages.
                                      9. CUSTOM MANUFACTURED PRODUCTS. PTT specializes in custom manufactured drivetrain products. Cost of development varies widely based on the size and scope of the project. Once a custom design is approved and signed off by the customer, payment terms are 50% down at time of the order, balance due upon delivery.